Daewoo ST Series Instruções de Operação descarregar pdf (Página 75)

•

Run-out

Support the camshaft on two V blocks

and check for run-out using a dial

indicator. Correct or replace the cam

shaft if the amount of run-out is

beyond the value indicating need for

servicing.

3) Camshaft end play

•

Push the thrust plate toward the cam

gear.

•

With a feeler gauge, measure the

clearance between the thrust plate

and camshaft journal.

•

If the end play is excessive, replace

the thrust plate.

6.2.6. Crank shaft

1) Defect check

•

Visually check the crankshaft journal and crank pins for scores or cracks.

•

Using a magnetic power and color check, inspect the crankshaft for cracks, and replace the

crankshaft which has cracks.

2) Wear measuring

•

With an outside micrometer measure

the diameter of the crankshaft journals

and pins in the directions as shown,

and compare the measured values to

determine the amount of wear.

•

If the amount of wear is beyond the

limit, polish the crankshaft and install

undersize bearings. However, if the

amount of wear is within the limit, you

can correct the wear using an oil

stone or oiled grinding paper of fine

grain size. (Be sure to use grinding paper which has been immersed in oil.)

- 72 -

EA0M4066

EA0M4067

간극 게이지

EAMD057I

Standard Limit

0.05 mm 0.2 mm

Standard Limit

0.28 ~ 0.43 mm 0.6 mm

Feeler gauge

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 182 183

Comentários a estes Manuais

Sem comentários

Daewoo ST Series Instruções de Operação Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Motor Daewoo ST Series