6.3.32. Thermostat
•
Install the thermostat.
•
Fit the new gasket on the thermostat
housing, then assemble the thermo-
stat housing with mounting bolts.
•
Assemble the hose clamps in both
sides of the heat exchanger and cool-
ing water pipe
6.3.33 Exhaust manifold
•
Assemble the exhaust manifold with
steel gasket in order to be installed in
the small hole between two holes of
the gasket upward and be sure to
check the squared port of the gasket
whether the square port of the cylinder
head is aligned before assembling.
•
Tighten the fixing bolts with specified
torque.
6.3.34. Intake manifold
•
Assemble the intake manifold includ-
ing the gasket.
•
Connect the air hose to the boost
compensator of the fuel injection
pump.
Comentários a estes Manuais