Daewoo ST Series Instruções de Operação descarregar pdf (Página 24)

4. Maintenance and Care

4.1. General Instructions

1. Before performing service operation, disconnect the grounding cable from the battery for

reducing the chance of cable damage and burning due to short-circuiting.

2. Use covers to prevent the disassembled parts and components from damage or pollution.

3. Engine oil and anti-freeze solution must be handled with care. They can cause damage for

painted parts.

4. The use of proper tools or specified special tools is important to perform the efficient and

reliable maintenance operation.

5. Use genuine DAEWOO parts necessarily.

6. Used cotter pins, gaskets, O-rings, oil seals, lock washer and self-lock nuts should be

discarded. New ones should be used for re-assembled parts. If these are reused, normal

performance can not be maintained.

7. To facilitate reassembling, keep disassembled parts neatly in groups. Fixing bolts and nuts

for reassembled parts should be reused at the original position. They are varied in hardness

or length because they are designed depending on their application.

8. Clean the disassembled parts prior to inspection or re-assembly. By using compressed air,

make oil ports and etc. of them free from any foreign material.

9. Lubricate the surface of rotating and sliding parts with oil or grease before installation.

10. If necessary, use sealant onto gaskets to prevent leakage.

11. Carefully obey all specified torque to tighten bolts and nuts

12. When maintenance is completed, make a final check to be sure it has been done properly.

- 21 -

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 182 183

Sem comentários

Daewoo ST Series Instruções de Operação Página 24