6.3.43. Alternator
•
Install the alternator mounting bracket.
•
Assemble the alternator and protector.
6.3.44. V - Belt
•
Install the V-belt on the crank pulley
and alternator.
•
Adjust the V-belt tension using the
tension adjusting bolt.
6.4. Break-in After Maintenance
Because the sliding parts of a new or an overhauled engine are not lapped enough, the oil film
can be destroyed easily by overload or over-speed and the engine life time may be shorten.
Therefore the operator must follow the things of “3.3 Engine Break-in” by all means.
- 104 -
Comentários a estes Manuais