Daewoo DSA-095L Especificações descarregar pdf (Página 70)

PROCEDURES PHOTOS

1. Stop the operation of the Air conditioner and disconnect the power cord

from the wall outlet.

2. Removing the Insert Grille and Frame Grille. (Fig 1~2)

1 Draw up the Insert Grille and remove it.

2 Loosen the screws fixed at the Cover Ter-Block.

3 Loosen two screw at the Frame Grille.

4 Remove the Frame Grille.

3. Removing the Control Box. (Fig 3)

1 Remove room and coil thermistors.

2 Disconnect the fan motor lead wire from connection at the

Control PCB.

3 Disconnect the stepping motor lead wire from connection at the

Control PCB.

4 Remove the select switch from connection at the Control PCB.

5 Loosen the screw fixed at the ground wire.

6 Remove the Control Box

4. Removing the Drain Pan. (Fig 4)

1 Disconnect the Body drain hole. (left and right Body)

2 Disconnect three hooks and remove the Drain Pan.

5. Removing the Indoor Evaporator. (Fig 5~6)

1 Remove the hook fixed at the Plate mounting of the back of Body.

2 Remove Indoor Evaporator.

6. Removing the Cross Flow Fan. (Fig 7)

1 Remove the set screw fixed at the Motor shaft.

2 Remove the Cross Flow Fan.

7. Remove the Motor IDU and the Bearing Plastic.

Fig 1

Fig 3

Fig 4

Fig 5

Fig 6

◆DSA-245L, 245P

Fig 2

Fig 7

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 97 98

Sem comentários

Daewoo DSA-095L Especificações Página 70