Daewoo DSA-095L Especificações descarregar pdf (Página 67)

INDOOR UNIT

PROCEDURES PHOTOS

1. Stop the Air conditioner and disconnect the power cord from the wall

outlet.

2. Removing the Insert Grille and Frame Grille. (Fig 1~2)

1 Draw up the Insert Grille and remove it.

2 Loosen one screw for fixing the Cover Ter-Block.

3 Loosen two screw at the Frame Grille.

4 Remove the Frame Grille.

3. Removing the Control Box. (Fig 3)

1 Remove room and coil thermistors.

2 Disconnect the fan motor lead wire from connection at the

Control PCB.

3 Disconnect the stepping motor lead wire from connection at the

Control PCB.

4 Remove the select switch from connection at the Control PCB.

5 Loosen a screw for fixing ground wire.

6 Remove the Control Box

4. Removing the Drain Pan. (Fig 4)

1 Disconnect the Body drain hole. (left and right Body)

2 Disconnect three hook and remove the Drain Pan.

5. Removing the Indoor Evaporator. (Fig 5~6)

1 Remove one screw for fixing indoor Evaporator at the Body.

2 Remove the hook for fixing Bracket Pipe at the back of Body.

3 Remove Indoor Evaporator.

6. Removing the Cross Flow Fan. (Fig 7)

1 Remove set screw for fixing Motor shaft.

2 Remove Cross Flow Fan.

7. Remove Motor IDU and Bearing Plastic.

10. DISASSEMBLY INSTRUCTIONS

Fig 1

Fig 3

Fig 4

Fig 5

Fig 6

◆DSA-095L, DSA-125L, 125P

Fig 2

Fig 7

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 97 98

Sem comentários

Daewoo DSA-095L Especificações Página 67