Daewoo DR-C92D1N Manual do Operador descarregar pdf (Página 26)

. REASSEMBLY

All parts are reassembled in the reverse order to the stripping procedure.

.CLEANING AND MAINTENANCE

It must be emphasized that all semi-auto rifles require constant cleaning

and maintenance and that most of stoppages mentioned elsewhere are the

result of the shooter's negligence or lack of knowledge of his rifle. All

rifles whether semi-auto or repeating rifles, should be cleaned at the end

of a day firing and special care must be taken after firing with blank cartri-

dge.

A. Maintenance of the rifle

The rifle, 5.56mm DR200 only needs to be field-stripped for this mainte-

nance. Maintenance procedure is as follows -

1) Use the Barrel cleaning brush. oiled with the special rifle bore oil

provided, and pass through the barrel several times.

2) Follower this by pulling through two or three dry rags.

3) Clean the chamber with the cleaning brush provided for this purpose.

4) Clean the bolt and bolt carrier.

5) Clean firing pin and firing pin hole.

6) Clean underneath the extractor claw. without stripping it.

7) Remove the gas regulator, the piston and its spring and carefully

clean these parts, as they are exposed to gas fouling.

8) Clean the gas cylinder and wipe with a slightly oiled rag.

9) Very slightly lubricate the moving parts of the mechanism.

- 23-

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Sem comentários

Daewoo DR-C92D1N Manual do Operador Página 26